NETGEAR M4300-52G-PoE+

NETGEAR M4300-52G-PoE+ - Commutateur - C3 - Géré - 2 x 10/100/1000/10000 + 2 x 10 Gigabit SFP+ + 48 x 10/100/1000 (PoE+) - flux d'air de l'avant vers l'arrière - Montable sur rack - PoE+ (860 W)

+ zoom

4036.98 € ttc

3336.35 € htva

Quantité

COMMANDER

4 EN STOCK
(Disponible 48h)

Catégorie	Concentrateurs & Commutateurs
Constructeur	NETGEAR
Modèle	M4300-52G-PoE+
Produit	NETGEAR
Référence Constructeur	GSM4352PB-100NES

The NETGEAR M4300 Switch Series delivers L2/L3/L4 and IPv4/IPv6 rich services for enterprise edge and SMB aggregation deployments with unrivaled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series. Non-stop forwarding virtual chassis architecture provides advanced High Availability (HA) with hitless failover, that is, distributed link aggregation allows for load balancing and virtually zero downtime. License-free L3 feature set includes static routing, policy-based routing, RIP, VRRP, OSpiv as well as Multicast PIM routing. The NETGEAR M4300 Switch Series is ready for the future, with Software-defined Network (SDN) and OpenFlow 1.3 enabled for your network.¦M4300-52G-PoE+ comes with 48 ports 1G PoE+ capable of full provisioning, 2 ports 10GBASE-T and 2 ports 10GBASE-X SFP+ in a full-width form factor. All 4 ports 10G are independent and can be used for stacking or uplinks: they are 1G backward compatible. In this GSM4352PB version, M4300-52G-PoE+ is delivering resilient and secure access layer in campus LAN environments and commercial buildings. Ideal for wireless access, unified communications and IP video applications: 591W (110V AC) or 860W (220V AC) PoE budget is provided by one APS1000W PSU. A second one will add 1+1 power redundancy in RPS mode, and extended 1,010W (110V AC) or 1,440W (220V AC) PoE budget in EPS shared mode. An additional RPS port is available for redundant power protection using external RPS, when both internal PSUs are used in EPS shared mode.

Spécifications Principales

Description du produit	NETGEAR M4300-52G-PoE+ - commutateur - 52 ports - Géré - Montable sur rack
Garantie du fabricant	Garantie à vie NETGEAR
CaractÃ©ristiques	Prise en charge d'ARP, prise en charge DiffServ, prise en charge d'IPv6, prise en charge du protocole STP (Spanning Tree Protocol), prise en charge du protocole RSTP (Rapid Spanning Tree Protocol), prise en charge du protocole VRRP (Virtual Route Redundancy Protocol), DHCP snooping, assistance Access Control List (ACL), qualité de service (QDS), snooping MLD, STP Root Guard, prise en charge IPv4, prise en charge LACP, relais DHCP, Remote Switch Port Analyzer (RSPAN), Per-VLAN Rapid Spanning Tree (PVRST), protection ARP dynamique, Protection de la source IP, Bridge protocol data unit (BPDU), LISP Across Subnet Mode (ASM), Source-Specific Multicast (SSM)
Alimentation	CA 120/230 V
Type de pÃ©riphÃ©rique	Commutateur - 52 ports - C3 - Géré - empilable
Type de chÃ¢ssis	Montable sur rack 1U
Localisation	Europe, Americas
Protocole de gestion Ã distance	SNMP, Telnet, HTTPS, SSH, CLI
Protocole de Routage	OSPF, RIP, IGMPv2, IGMP, VRRP, PIM-SM, PIM-DM, IGMPv3, MLDv2
ConformitÃ© aux normes	IEEE 802.3ad (LACP), IEEE 802.3az
Services regroupÃ©s	Garantie à vie NETGEAR
Performances	Capacité de commutation: 176 Gbps
Power Over Ethernet (PoE)	PoE+
Ports	2 x 10/100/1000/10000 + 2 x 10 Gigabit SFP+ + 48 x 10/100/1000 (PoE+)
Budget PoE	860 W
Sous-type	10 Gigabit Ethernet
Services inclus	Garantie à vie NETGEAR
Normes de conformit?	IEEE 802.3ad (LACP), IEEE 802.3az
Type de bo?tier	Flux d'air de l'avant vers l'arrière Montable sur rack 1U

Prix et informations mentionnés sous réserve d'erreurs ou d'omission - Photos non contractuelles

* Le stock et le délai de livraison peuvent changer à tout moment, à la hausse comme à la baisse.

NETGEAR M4300-52G-PoE+

SUPPORT

MODES DE PAIEMENTS

NOS AUTRES DIVISIONS

CONTACT